+353871828810

MOTUL 300V FACTORY LINE RACING 10W40, 4 L

58,08

APPLICATIION | RACING – FACTORY LINE
ENGINE TYPE |4-STROKE
PRODUCT TYPE | STREET BIKE
QUALITY | 100% SYNTHETIC
PRODUCT RANGE | MOTORCYCLE
VISCOSITY 10W40
OEM APPROVALS | ABOVE EXISTING STANDARDS

Category: Tags: , ,

Description

MOTUL 300V FACTORY LINE RACING OIL 10W40

 

100% synthetic 4-Stroke motorcycle racing lubricant developed for Factory Teams. 300V Factory Line lubricant takes advantage of the ESTER Core® Technology to ensure you maximum power output of the engine without compromising the reliability and the wear.

By selecting esters over other high performance synthetic base stocks and combining them with an innovative additive package, MOTUL has created a perfect synergy dedicated to the engine, the gearbox and the clutch.

TYPE OF USE
Race bikes fitted with high performance 4 stroke engines, integrated gearbox or not, wet or dry clutch,
race engines, qualifying engines running at high temperature, over a wide rpm range : speed bikes,
SuperSport, SuperBike, endurance, uphill races, dirt bikes, MX, enduro, trial…
Other uses : street bikes, scooters, ATV, mopeds fitted with catalytic converters.
PERFORMANCE
STANDARDS Above existing standards
Wet clutch compatibility checked on JASO T904 test.
Reference team Alstare World SuperSport, National Moto Endurance, Suzuki World MX
Extra engine power up to 3% : Double Ester technology. Tribologic tests performed put in evidence low
traction coefficient of chosen polymer and complex Esters. Low traction coefficient reduces engine
internal friction and then increase power output.
Engine protection : 0% shear loss on Bosch test ASTM D6278
Gearbox protection : shear resistance improved by 66% on KRL 20 hours tests (CEC L-45-A-99) – test
originally set up for gearbox lubricants, 10 times more severe than Bosch test.
Extra power at the rear wheel : Wet clutch lock up improvement.
Better rev raising, better engine response, maximum engine power.

RECOMMENDATIONS
Oil change: According to your own use.
Can be mixed with synthetic or mineral lubricants.
PROPERTIES
Colour Visual Yellow / Green Fluo
Viscosity grade SAE J 300 10W-40
Density at 20°C (68°F) ASTM D1298 0.860
Viscosity at 40°C (104°F) ASTM D445 82.3 mm²/s
Viscosity at 100°C (212°F) ASTM D445 13.13 mm²/s
Viscosity index ASTM D2270 160
Pour point ASTM D97 -42°C / – 43°F
Flash point ASTM D92 240°C / 464°F
TBN ASTM D 2896 8.3 mg KOH/g

Collection avalable Dublin

For any questions please CONTACT US or

Visit us on  FACEBOOK